Headstock Bearings and Seals: Yamaha FS1E FS 1E (1987-1992) Honda CRF70 This set of carburettor to

This set of carburettor to head intake / inlet rubber manifold rubbers have been manufactured to replace the original set on a Yamaha YFZ350 for the years and models shown above

This speedo cable has been designed to replace the original cable on a Kawasaki ZZR600  for the years and models shown above

Kawasaki ZX-12R Ninja (ZX1200 B) (2002-2006)

This set of brake pads will fit the front and rear brake on a Yamaha WR250 for the years and models shown above

If you are having spark issues with your Suzuki RG500 then the ignition coils could be the culprit as they are now about 40 years old and would certainly would benefit with an upgrade for some new aftermarket coils

Headstock Bearings and Seals: Yamaha FS1E FS 1E (1987-1992) Honda CRF70 This set of carburettor toBrand new set of headstock steering bearings and seals to fit: Yamaha FS1E (1987 1992). This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a Yamaha FS1E for the years and models shown above. Top sized: 25mm x 48mm x 12mm. Bottom sized: 30mm x 48mm x 12mm. All sizes set out ID x OD x Thickness. The seals are not included in the measurements. If you require different